Roundcube error – Misconfiguration: Unregister markasjunk2 in ./config/main.inc.php
This roundcube error happens after an update on a plesk panel Fix: Reinstall roundcube in the plesk panel under Update and upgrades
This roundcube error happens after an update on a plesk panel Fix: Reinstall roundcube in the plesk panel under Update and upgrades
http://www.itzgeek.com/how-tos/linux/centos-how-tos/rescue-your-system-with-single-user-mode-in-centos-6-rhel-6.html#axzz3RggXv3TW
You would add the DKIM record as a txt record Name: 122132._domainkey Value: DKIM public key and options
Add the clean IP to the server. Edit the firewall to NAT all connections FROM port 25 to use the new IP. Ensure that the IP is on eth1 or…
What is the difference between SATA I, SATA II and SATA III? SATA I (revision 1.x) interface, formally known as SATA 1.5Gb/s, is the first generation SATA interface running at 1.5 Gb/s. The bandwidth throughput, which is supported by the interface, is up to 150MB/s. SATA II (revision 2.x) interface, formally known as SATA 3Gb/s, … Read more
To get the depth information of your network interfaces like IP Address, MAC Address information, use the following command as shown below.
If you have a hardware RAID controller, I’d find out if you can read its log (if 3Ware, use tw_cli). And, whether you have hardware or software RAID, you can look at the SMART parameters of the disks (if the disks are connected to a RAID controller, you may need special commands to access them. … Read more
Getting hard disk model and number under Linux Try command as follows for /dev/sda (SATA). You need to pass -i or -I option which request identification info directly from the drive, which is displayed in a new expanded format: # hdparm -I /dev/sda # hdparm -I /dev/sda | grep Serial OR for IDE /dev/hda # … Read more